Dell 1737 - Studio - Laptop Скачать руководство пользователя страница 41

Страница: 41 / 47

Back to Contents Page

Palm Rest

Dell™ Studio 1735/1737 Service Manual

Removing the Palm Rest

Replacing the Palm Rest

Removing the Palm Rest

Follow the instructions in

Before You Begin

Press and eject any installed cards from the ExpressCard slot and the 8-in-1 memory card reader.

Remove any installed memory modules and Mini-Cards (see

Memory

and

Communication Cards

Follow the instructions in

Display Assembly

Turn the computer upside down and remove the eight screws from the computer base.

Turn the computer top side up and remove the four screws from the top of the palm rest.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as the back panel) on the computer.

1 screw (4)

2 palm rest

3 media control buttons cable

connector

4 touch pad cable connector

Содержание 1737 - Studio - Laptop
















































Результаты поиска

Содержание 1737 - Studio - Laptop

Отзывы:

Похожие инструкции для 1737 - Studio - Laptop

Бренды по названию

Популярные бренды

Dell 1737 - Studio - Laptop, Руководство по обслуживанию

Результаты поиска

Содержание 1737 - Studio - Laptop

Отзывы:

Похожие инструкции для 1737 - Studio - Laptop

Бренды по названию

Популярные бренды