LOM riser card specifications
The XC Core XC6515 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located on the
back panel. The system also supports LAN on Motherboard (LOM) on an optional riser card.
You can install one LOM riser card. The supported LOM riser options are:
•
2 x 10Gb Base-T
•
2 x 10Gb SFP+
•
2 x 25Gb SFP+
NOTE:
• You can install up to two PCIe add-on NIC cards.
• For information about Linux network performance settings, see the
Linux Network Tuning Guide for AMD EPYC
Processor Based Servers
Serial connector specifications
The Dell EMCXC Core XC6515 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.
VGA ports specifications
The XC Core XC6515 system supports two 15-pin VGA ports one each on the front and back panels.
IDSDM
The XC Core XC6515 system supports Internal Dual SD module (IDSDM) with the below storage capacity:
•
32 GB
•
64 GB
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded microSD cards that are associated with the IDSDM configured systems.
Video specifications
The Dell EMCXC Core XC6515 system supports integrated Matrox G200eR2 graphics controller with 16 MB of video frame buffer.
Table 67. Supported front video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
1024 x 768
60
8, 16, 32
1280 x 800
60
8, 16, 32
1280 x 1024
60
8, 16, 32
1360 x 768
60
8, 16, 32
1440 x 900
60
8, 16, 32
Table 68. Supported rear video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
1024 x 768
60
8, 16, 32
1280 x 800
60
8, 16, 32
136
Technical specifications
