WARNING:
The memory modules are hot to touch for some time after the appliance has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or
metallic contacts on the memory module.
CAUTION:
To ensure proper appliance cooling, memory module blanks must be installed in any memory socket that is not
occupied. Remove memory module blanks only if you intend to install memory modules in those sockets.
Steps
1
Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the memory
module or metallic contacts.
2
To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket.
3
Lift and remove the memory module from the appliance.
Figure 20. Removing the memory module
1
memory module
2
memory module socket
3
memory module socket ejector (2)
Next steps
1
Install the memory module.
NOTE:
If you are removing the memory module permanently, install a memory module blank.
2
Install the cooling shroud.
3
Follow the procedure listed in the After working inside your appliance section.
Installing memory modules
Prerequisites
WARNING:
The memory modules are hot to touch for some time after the appliance has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or
metallic contacts on the memory module.
62
Installing and removing components
