2
Under
SYSTEM THERMAL PROFILE
>
Thermal Profile
, select one of the following options:
•
Default Thermal Profile Settings
•
Maximum Performance (Performance Optimized)
•
Minimum Power (Performance per Watt Optimized)
3
Under
USER COOLING OPTIONS
, set the
Fan Speed Offset
,
Minimum Fan Speed
, and
Custom Minimum Fan Speed
.
4
Click
Back
>
Finish
>
Yes
.
Device Settings
Device Settings
enables you to configure device parameters.
Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded appliance management capabilities including appliance deployment,
configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell EMC appliance
embedded Unified Extensible Firmware Interface (UEFI) applications.
NOTE:
Dell EMC has optimized your appliance and recommends that you do not change any of these settings.
Embedded systems management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the lifecycle of the appliance. The Dell
Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.
NOTE:
Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.
Boot Manager
The
Boot Manager
screen enables you to select boot options and diagnostic utilities.
NOTE:
Dell EMC has optimized your appliance and recommends that you do not change any of these settings.
Viewing Boot Manager
To enter
Boot Manager
:
1
Turn on, or restart your appliance.
2
Press F11 when you see the following message:
F11 = Boot Manager
If your operating system begins to load before you press F11, allow the appliance to complete the booting, and then restart your
appliance and try again.
48
Pre-operating system management applications
