Dell EMC S5048F-ON, Руководство по установке

Страница: 37 / 45

Starts ONIE without ONIE Discovery Service
Useful for running Diagnostics manually
ONIE: Uninstall OS
Restore to factory defaults erases any installed OS
ONIE: Update ONIE
For downloading and updating ONIE from a URL
ONIE: Embed ONIE
For downloading and updating ONIE from a URL and erases any installed OS
During the initial setup, the switch boots to ONIE Install. ONIE Install boots with ONIE Discovery to the console,
ONIE:
.
NOTE: For more information, see the
Open Networking Hardware Diagnostic Guide
.
NOTE: After you have securely installed and powered on the S5048F-ON switch, to configure your switch, see your third-party
ONIE-compatible OS or the Dell EMC OS documentation.
Check your switch
To confirm that ONIE is working properly, use the
onie-sysinfo
command. Run the
onie-sysinfo
command at the ONIE prompt.
ONIE:/ # onie-sysinfo x86_64-dell_< platform >_c25
ONIE:/ # onie-sysinfo –c (Machine arch)
x86_64
ONIE:/ # onie-sysinfo –v (ONIE Version programmed)
x.xx.x.x
ONIE:/ #
ONIE:/ # uname -a
Linux onie 3.2.35-onie+ #1 SMP Tue Dec 9 17:08:16 PST 2014 x86_64 GNU/Linux ONIE:/ #
ONIE:/ # lspci
00:00.0 Class 0600: 8086:1f0c
00:01.0 Class 0604: 8086:1f10
00:02.0 Class 0604: 8086:1f11
00:03.0 Class 0604: 8086:1f12
00:0e.0 Class 0600: 8086:1f14
00:0f.0 Class 0806: 8086:1f16
00:13.0 Class 0880: 8086:1f15
00:14.0 Class 0200: 8086:1f41
00:14.1 Class 0200: 8086:1f41
00:14.2 Class 0200: 8086:1f41
00:16.0 Class 0c03: 8086:1f2c
6:1f22 lass 0106: 8086:1f32
00:1f.0 Class 0601: 8086:1f38
00:1f.3 Class 0c05: 8086:1f3c
01:00.0 Class 0200: 14e4:b960 (NPU PCI detection)
01:00.1
ONIE:/ #
ONIE service discovery
ONIE attempts to locate the installer through several discovery methods, as shown. To download and run an installer, the ONIE Service
Discovery feature uses the first successful method found.
1 Passed from the boot loader.
2 Search locally attached storage devices for one of the ONIE default installer filenames—for example, USB.
3 Exact URLs from DHCPv4.
4 Report inexact URLs based on the DHCPv4 responses.
5 Query to the IPv6 link-local neighbors using HTTP for an installer.
6 Start TFTP waterfall—from the DHCPv4 option 66.
ONIE
ifconfig eth0
command examples
If none of the ONIE Service Discovery methods are successful, you can disable this using the onie-discovery-stop command.
Management ports 37