manualshive.com logo in svg

Dell EMC PowerVault MD 3400, Руководство администратора

Поделиться
Скачать
Dell EMC PowerVault MD 3400 Скачать руководство пользователя страница 40

Locating storage arrays

You can use the 

Blink

 option to physically locate and identify a storage array. To locate the storage array:

1 

Select the relevant storage array and do one of the following:
•

In the EMW, right-click the appropriate storage array, and select 

Blink Storage Array

.

•

In the AMW, select the 

Setup

 tab, and click 

Blink Storage Array

.

•

In the AMW, select 

Hardware

 > 

Blink

 > 

Storage Array.

The LEDs on the physical disks in the storage array blink.

2 

After locating the storage array, click 

OK

.

The LEDs stop blinking.

3 

If the LEDs do not stop blinking, select 

Hardware

 > 

Blink

 > 

Stop All Indications.

Naming or renaming storage arrays

You can name, rename, and add comments to a storage array to facilitate identification of the storage array.
Follow these guidelines to name a storage array:

•

Each storage array must be assigned a unique alphanumeric name up to 30 characters long.

•

A name can consist of letters, numbers, and the special characters underscore (_), dash (–), and pound sign (#). No other special 

characters are allowed.

To rename a selected storage array:

1 

Perform one of these actions:
•

In the AMW, select 

Setup

 > 

Rename Storage Array.

•

In the EMW, select 

Devices

 tab Tree view, select 

Edit

 > 

Rename.

•

In the EMW, 

Devices

 tab Tree view, right-click the desired array icon and select 

Rename.

The 

Rename Storage Array

 dialog is displayed.

2 

Type the new name of the storage array.

NOTE: 

Avoid arbitrary names or names that may lose meaning in the future.

3 

Click 

OK

.

A message is displayed warning you about the implications of changing the storage array name.

4 

Click 

Yes

.

The new storage array name is displayed in the EMW.

5 

Repeat step 1 through step 4 to name or rename additional storage arrays.

Setting a password

You can configure each storage array with a password to protect it from unauthorized access. The MD Storage Manager prompts for the 
password when an attempt is made to change the storage array configuration, such as, when a virtual disk is created or deleted. View 
operations do not change the storage array configuration and do not require a password. You can create a new password or change an 
existing password.
To set a new password or change an existing password:

1 

In the EMW, select the relevant storage array and open the AMW for that storage array.

40

Discovering and managing your storage array

Содержание PowerVault MD 3400


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды