Dell EMC PowerVault MD 3400 Скачать руководство пользователя страница 175 | Manualshive

Страница: 175 / 185

Dell EMC PowerVault MD 3400 Скачать руководство пользователя страница 175

Status

Icon

Description

Adding a Storage Array

The

Contacting Storage Array

icon is

shown in the Tree view and Table view until
the status of each managed storage array is
known.
The

Contacting Storage Array

icon is

shown in the EMW Status Bar and the

AMW Status Bar, and the tooltip shows

Contacting Storage arrays.

As each storage array is contacted, its

status is obtained and shown in the Tree

view and Table view. The applicable statuses

are the Optimal, Needs Attention, Fixing, or

Unresponsive.

Adding a Storage Array OK

No problems were encountered while adding
the storage array.
The MD Storage Manager continues to

check for any status change events.

Adding a Storage Array Error

Displayed only when an error occurs.

In the Tree view, icons can appear in a string to convey more information. For example, the following string means that the storage array is

optimal, an alert is set for the storage array, and firmware is available for download:

NOTE:

The MD Storage Manager may take a few minutes to update a status change to Unresponsive or from Unresponsive. A

status change from or to Unresponsive depends on the network link to the storage array. All other status change updates faster.

Trace buffers

Trace information can be saved to a compressed file. The firmware uses the trace buffers to record processing activity, including exception
conditions, that may be useful for debugging. Trace information is stored in the current buffer and can be moved to the flushed buffer after
being retrieved. Because each RAID controller module has its own buffer, there may be more than one flushed buffer. The trace buffers can
be retrieved without interrupting the operation of the storage array and with minimal effect on performance.

NOTE:

Use this option only under the guidance of a Technical Support representative.

A zip-compressed archive file is stored at the location you specify on the host. The archive contains trace files from one or both of the
RAID controller modules in the storage array along with a descriptor file named

trace_description.xml

. Each trace file includes a header

that identifies the file format to the analysis software used by the Technical Support representative. The descriptor file contains:

•

The WWN for the storage array.

•

The serial number of each RAID controller module.

•

A time stamp.

•

The version number for the RAID controller module firmware.

•

The version number for the management application programming interface (API).

•

The model ID for the RAID controller module board.

•

The collection status for each RAID controller module. If the status is Failed, the reason for failure is noted, and there is no trace file for

the failed RAID controller module.

Storage array software

175

«
...
173
174
175
176
177
...
»

Содержание PowerVault MD 3400


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды