Figure 2. S4810–ON PSU-Side View
1. Mounting Bracket
2. Fan Module 1
3. Fan Module 2
4. Mounting Bracket
5. Power Supply (PSU2)
6. Power Supply (PSU1)
7. Grounding Screw
Orderable S4810–ON Components
You can order the S4810–ON system in several different configurations. You can also order optional modules and optics separately.
You can order the following supported hardware components.
•
48-port 10G SFP+ with four QSFP+, 40G ports, one AC power supply, and two fan subsystems (airflow from I/O side to power supply
side)
•
48-port 10G SFP+ with four QSFP+, 40G ports, one AC power supply, and two fan subsystems (airflow from power supply side to I/O
side)
•
S4810–ON Series — Fan with airflow from the I/O side to the PSU side
•
S4810–ON Series — Fan with airflow from the PSU side to the I/O side
•
S4810–ON Series — AC Power supply with airflow from the I/O side to the PSU side
•
S4810–ON Series — AC Power supply with airflow from the PSU side to the I/O side
For a list of supported optics, contact your Dell EMC sales representative.
Prerequisite
To successfully install the S4810–ON, ensure that you have the following components.
•
S4810–ON chassis
•
At least one grounded AC power source per chassis
•
Cable to connect the AC power source to the chassis (US power cables included)
•
Mounting brackets for rack installation (included)
•
Screws for rack installation and #1 and #2 Phillips screwdrivers (not included)
•
Ground cable (not included, optional)
•
Ground cable screws (included)
•
Copper/fiber cables
Other optional components are:
•
Additional power supply unit
•
Additional fan module
•
Additional mounting brackets (if installing in a four-post rack or cabinet)
The S4810–ON System
7
