Dell EMC PowerEdge XE7420, Инструкция по установке и обслуживанию

Страница: 91 / 117

Installing the fabric processor into the processor heat sink module
Prerequisites
Follow the safety guidelines listed in Safety instructions .
Steps
1. Ensure that the processor is in the CPU tray.
NOTE: Ensure that pin 1 indicator on the CPU tray is aligned with the pin 1 indicator on the processor.
2. Flex the outer edges of the bracket around the processor, close to the fabric connector, ensuring that the processor is
locked into the clips on the bracket.
3. Press the other end of the bracket to ensure that the clip is locked on to the processor.
NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
Figure 56. Installing the processor bracket
4. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
5. Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of
the processor.
NOTE: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Installing and removing system components 91