Dell EMC PowerEdge xe7100, Инструкция по установке и обслуживанию, Страница: 36 / 89

Expander module
Removing the expander module
Prerequisites
1. Follow the safety guidelines listed in safety instructions .
2. Follow the procedure listed in the Before working inside your system .
Steps
1. Loosen the captive screw.
2. Pull the expander module handle from under the expander module.
3. Using expander module pull handle, slide the expander module out of the enclosure horizontally.
Figure 31. Removing the expander module
Next steps
1. Install the expnader module .
Installing the expander module
Prerequisites
1. Follow the safety guidelines listed in safety instructions .
Steps
1. Align and slide the expander module into the chassis.
2. Push the expander module pull handle.
3. Tighten the captive screw.
NOTE: Ensure both the expander modules are installed completely before powering up the chassis.
36 Installing and removing enclosure components