manualshive.com logo in svg

Dell EMC P92F, Руководство по обслуживанию

Поделиться
Скачать
Dell EMC P92F Скачать руководство пользователя страница 41

Steps

1. Remove the two screws (M2x4) that secure the display-cable bracket to the system board.
2. Lift the display-assembly cable bracket off the system board.
3. Push the camera connector and the display connector away from the system board to disconnect them from the system board.
4. Remove the three screws (M2.5x5) that secure the left display hinge to the palm-rest and keyboard assembly.
5. Remove the three screws (M2.5x5) that secure the right display hinge to the palm-rest and keyboard assembly.
6. Lift the left and the right hinges from the palm-rest and keyboard assembly.
7. Slide the palm-rest and keyboard assembly from the display assembly.
8. After performing all the above steps, you are left with the display assembly.

Installing the display assembly

Prerequisites

About this task

The following images indicate the location of the display cable and the display hinges and provide a visual representation of the installation
procedure.

Disassembly and reassembly

41

Содержание P92F





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды