Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated by the numbers on the heat sink), replace the four screws (M2x6.5) that secure the heat sink to the
system board.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Removing the heat sink
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
2. Remove the
3. Remove the
.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
Disassembly and reassembly
35
Содержание P92F
Страница 1: ...Dell Precision 5750 Service Manual Regulatory Model P92F Regulatory Type P92F001 May 2020 Rev A00 ...
Страница 40: ...40 Disassembly and reassembly ...
Страница 42: ...42 Disassembly and reassembly ...
Страница 48: ...48 Disassembly and reassembly ...
