manualshive.com logo in svg

Dell EMC Inspiron 14 5000, Руководство по обслуживанию

Поделиться
Скачать
Dell EMC Inspiron 14 5000 Скачать руководство пользователя страница 38

Replacing the heat-sink assembly

NOTE:

 Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

.

CAUTION:

 Incorrect alignment of the heat sink can damage the system board and processor.

NOTE:

 The original thermal grease can be reused if the original system board and fan are reinstalled together. If either

the system board or the fan is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is
achieved.

Topics:

•

Procedure

•

Post-requisites

Procedure

1. Align the screw holes on the heat-sink assembly with the screw holes on the system board.
2. In sequential order, as indicated on the heat-sink assembly, tighten the captive screws that secure the heat-sink assembly to the

system board.

3. Replace the screws that secure the heat-sink assembly to the system board.
4. Connect the fan cable to the system board.

Post-requisites

1. Replace the 

computer base

.

2. Replace the 

keyboard

.

3. Replace the 

wireless card

.

4. Follow the procedure from step 5 to step 7 in “

Replacing the hard drive

”.

5. Replace the 

memory modules

.

6. Replace the 

optical drive

.

7. Replace the 

base cover

.

8. Replace the 

battery

.

24

38

Replacing the heat-sink assembly

Содержание Inspiron 14 5000
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды