Dell EMC Inspiron 14 5000, Руководство по обслуживанию

Страница: 15 / 79

Removing the optical drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Topics:
• Procedure
• Post-requisites
Procedure
1. Align the screw holes on the optical-drive bracket with the screw holes on the optical drive.
2. Replace the screws that secure the optical-drive bracket to the optical drive.
3. Align the tabs on the optical-drive bezel with the slots on the optical-drive assembly and snap the optical-drive bezel into place.
4. Slide the optical-drive assembly into the optical-drive bay and align the screw hole on the optical-drive bracket with the screw hole on
the computer base.
5. Replace the screw that secures the optical-drive assembly to the computer base.
Post-requisites
Replace the battery .
6
Removing the optical drive 15