Dell EMC ChengMing 3988, Руководство по установке и техническим характеристикам

Страница: 22 / 30

Option Description
Hyper-Thread Control Allows you to enable or disable the HyperThreading in the processor.
• Disabled
• Enabled (default)
Table 25. Power Management
Option Description
AC Recovery Determines how the system responds when AC power is re-applied after a power loss. You can set
the AC Recovery to:
• Power Off
• Power On
• Last Power State
This option is Power Off by default.
Enable Intel Speed Shift
Technology The option is enabled by default
Auto On Time Sets time to automatically turn on the computer. Time is kept in standard 12-hour format
(hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields.
NOTE: This feature does not work if you turn off your computer using the switch on a
power strip or surge protector or if Auto Power is set to disabled.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled (default)
• Enabled in S5 only
• Enabled in S4 and S5
This option is Disabled by default.
USB Wake Support Allows you to enable the USB devices to wake the computer from standby mode. This option is
enabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.
Table 26. POST Behavior
Option Description
Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
enabled by default.
Fast Boot This option can speed up the boot process by bypassing some compatibility steps:
• Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Extended BIOS Post Time
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo The option is disabled by default
Warnings and Errors
• Prompt on Warnings and Errors (default)
• Continue on Warnings and Errors
• Continue on Warnings
22 System setup