USB CompactFlash I/II Reader
DDREADER-12
Page 2
Delkin Devices User’s Manual
Driver Software Installation for Apple Macintosh
Driver Software Installation Procedure for Apple MacOS 9.04, 9.1, X
Driver installation is not necessary for the MacOS 9.0.4, 9.1and X operating systems.
When the Reader-12 is connected to the USB port, the computer will automatically
detect it and configure the correct drivers. With a card inserted, the reader can be
accessed through the disk icon that will appear on the desktop. For these operating
systems, the Reader-12 will use the MSD (Mass Storage Device) specification.
Driver Software Installation Procedure for Apple MacOS 8.5.1+
Before connecting the Reader-12, you must install the device drivers located on the
accompanying CD-ROM. To avoid compatibility issues, install only the Reader-12 driver.
Slot (front) loading CD-ROMs may not function correctly with a 3” CD disk. For these
systems it is recommended that you download the driver from www.delkin.com
Figure 1: Windows Installation Program
Figure 2: Macintosh Installation Program
Hardware Installation
Insert the USB plug of the Reader-12 into the USB port of your computer or hub. See
inside front cover for illustration.
4.
Verify that your product matches
the one pictured on the screen.
5.
Click the button labeled
Click Here
to Begin Installation
and follow the
on-screen instructions. For best
results,
allow the drivers to be
installed into the default locations.
6.
When the
Setup Complete
screen
appears, click the
Finish
button.
7. Connect the Reader-12 to the USB
port or hub.
8. You may now insert a Compact
Flash and access it like other
drives by clicking the
Removable
Disk
drive icon in
My Computer
.
Prior to any software installation alwaysensure
you have backed up your hard driveand
prepared a recovery disk.
1. Insert the Driver CD-ROM, then double-
click on the CD icon when it appears.
2.
Select
eFilm Reader-12
from the product
list. (See Figure 2)
3.
Click the button labeled
Install
and follow
the on-screen instructions. Select
Restart
Computer
after installation is complete.
