Deliberant DBL2119, Руководство пользователя

Страница: 53 / 65

52
QoS Enabled Select this check box to enable quality of service.
Bandwidth Borrowed Select this check box to allow a rule to borrow unused bandwidth.
Bandwidth borrowing is decided by priority of the rules. Higher
priority will get the remaining bandwidth first.
Max Throughput Enter the value of max throughput in kbps that you want to allocate
for one rule. The value should between 1200 kbps and 24000 kbps.
Bandwidth Ratio (H/M/L) You can specify the ratio of priority in these fields. The range from 1
to 99. The High priority
‟s ratio should higher than Medium priority‟s
ratio and Medium priority
‟s ratio should higher than Low priority‟s
ratio.
Apply Changes Click this button to save and apply your settings.
QoS Rule settings
Label Description
IP Address Enter source/destination IP Address in dotted decimal notation.
Netmask Once the source/destination IP Address is entered, the subnet mask
address must be filled in this field.
MAC Address Enter source/destination MAC Address.
Port / range You can enter specific port number or port range of the
source/destination
Protocol Select a protocol from the drop down list box. Choose TCP/UDP,
TCP or UDP.
Bandwidth Priority Select a bandwidth priority from the drop down list box. Choose
Low, Medium or High.
Filter Priority Select a filter priority number from the drop down list box. Lower
number gets higher priority while two rules have the same
bandwidth priority.
IP TOS Match Select an IP type-of-service value from the drop down list box.
Choose Normal Service, Minimize Cost, Maximize Reliability,
Maximize Throughput, or Minimize Delay.
Apply Changes Click this button to save and apply your settings.
Reset Click this button to begin re-input the parameters.
Current QoS setting table
In this part, you can see how many rules have been specified. In addition you can see the detail about the rules and manage