4. Move the hand blender gently in an up and down motion, until the
mixture is at the desired consistency. If an extra boost of power is
required when blending, push the Turbo Button.
NOTE: The Power Button must be released when selecting the Turbo
Button.
5. Once ingredients have reached the desired consistency, release the Power
or Boost Button.
6. Wait until the motor has completely stopped before lifting the hand
blender out of the measuring cup.
7. Unplug from the wall outlet.
8. To detach the Blending Attachment, hold the Motor Body with one hand.
Using your thumb and finger, push the button on either side of the Motor
Body while holding the Blending Attachment with the other hand. Pull
the Motor Body away from the Blending Attachment until the two pieces
separate.
NOTE:
If food gets lodged around the Blade or the Blade Guard, unplug
the unit from the wall outlet and use a spatula to dislodge the food. The
Blade is very sharp. DO NOT use your fingers.
IMPORTANT:
NEVER immerse the hand blender past the length of the
Blending Attachment. DO NOT immerse beyond the seam of the Blending
Attachment. NEVER immerse the Motor Body into any liquid or mixture.
HELPFUL HINTS
•
To use the Blending Attachment in a saucepan, be sure to remove the
pan from the stove as the Blending Attachment is not designed for use
over a heat source.
•
When blending in non-stick cookware, be careful not to scratch the
coating with the blade.
•
When blending or pureeing, cut food into uniform sizes for best
results.
•
This appliance is not designed to chop ice. Add ice to beverages
after blending.
5
Booklet_DLHB-414_ENG 7/28/08 5:19 PM Page 5
