Delfield Meridian MHR1-G, Руководство по обслуживанию и установке, Страница: 2 / 26

Meridian Series
®
Reach-Ins Service and Installation Manual
For customer service, call (800) 733-8829 or (800) 733-8948, Fax (989) 773-3210, www.delfield.com
2
Meridian Series
®
Reach-Ins Service and Installation Manual
3
For customer service, call (800) 733-8829 or (800) 733-8948, Fax (989) 773-3210, www.delfield.com
RECEIVING AND INSPECTING UNIT ................................................. 2
MECHANICAL DATA ....................................................................... 3-7
INSTALLATION............................................................................... 8-9
OPERATION .................................................................................... 10
ROUTINE MAINTENANCE .......................................................... 10-11
DEFROST TIMER............................................................................. 12
PARAGON TIMER............................................................................ 13
ERC CONTROL................................................................................ 14
WIRING DIAGRAM..................................................................... 15-19
REPLACEMENT PARTS LIST...................................................... 20-22
STANDARD LABOR GUIDELINES.................................................... 23
STANDARD WARRANTIES.............................................................. 24
NOTES ............................................................................................ 25
AUTHORIZED PARTS DEPOTS..........................................BACK PAGE On refrigeration, freezer and heated storage units, the serial tag is
located inside the right most door (the only door on a one-door unit),
near the top front corner of the right interior wall.
Always have the serial number of your unit available when calling for
parts or service. A complete list of authorized Delfield parts depots is
shown on the back cover of this manual.
This manual ©2004 The Delfield Company. All rights reserved. Reproduction
without written permission is prohibited. Meridian Series
® and Delfield are
registered trademarks of The Delfield Company
Even though most equipment is shipped crated, care should
be taken during unloading so the equipment is not damaged
while being moved into the building.
1. Visually inspect the exterior of the package and skid or
container. Any damage should be noted and reported
to the delivering carrier immediately.
2. If damaged, open and inspect the contents with the
carrier.
3. In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally
as well as in written form.
4. Request an inspection by the shipping company of the
damaged equipment. This should be done within 10
days from receipt of the equipment.
5. Check the lower portion of the unit to be sure legs or
casters are not bent.
6. Also view the compressor compartment housing and
visually inspect the refrigeration package. Be sure lines
are secure and base is still intact.
7. Freight carriers can supply the necessary damage forms
upon request.
8. Retain all crating material until an inspection has been
made or waived.
RECEIVING AND INSPECTING THE EQUIPMENT
CONTENTS
SERIAL NUMBER LOCATION