![background image](http://html1.mh-extra.com/html/delfield/f28110/f28110_specifications_2466541001.webp)
PROJECT _____________________________________
ITEM NUMBER_________________________________
QUANTITY _______________ DATE________________
APPROVAL____________________________________
Short Form Specifications
Exterior
top is 18-gauge stainless steel with standard marine edges on
all four sides. Corners are fully welded with smooth radii corners for easy
clean out. Interior subtop is 22-gauge stainless steel. Over two inches of
Polyurethane two-part foam provides insulation and rigidity.
Refrigerated base has 22 gauge stainless steel interior back and bottom
with ABS thermoformed sides. Base exterior back, bottom and sides are
constructed of galvanized steel.
Finished stainless steel ends are standard. Louver, coil panel and drawer
faces are all standard with stainless steel construction. (Unit is supplied
with a wall-mounted bracket and threaded rod to allow installation of the
unit against a solid surface.)
Units foundation is made of 14 gauge 1.50" x 3.25" thick galvanized leg
rails with casters as standard. Unit comes standard with a stainless steel
leg rail cover-up skin. Legs available on request.
The Full Extension Plus
drawer system is independently self-sufficient
without relying on the cabinet for strength. The entire drawer assembly
is constructed of stainless steel. Drawer tracks are 11 gauge and track
supports and cross members are 12 gauge. Rollers are made of self-
lubricating Delrin material and do not require any grease. Intermediate
tracks are removable without tools. Drawer boxes are designed to allow
easy grip of pan flanges. Stay shut feature allows drawers to remain closed
on uneven floors. Drawers will accommodate 4.00" deep pans only. Slots
are provided for optional adaptor bars to accommodate fractional and full
size pans.
Mullion Coil Refrigeration
system uses HFC-404A refrigerant, and main-
tains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C)
ambient room temperature. Both remote and self-contained models are
standard with exterior digital thermometer and electric condensate evapora-
tors. Electrical connections shall be 115 volt, 60 hertz and single phase.
THE FOLLOWING APPLIES TO F2800 SERIES (REMOTE) ONLY:
Remote models have a thermometer installed in the removable access
panel, electric condensate evaporator, solenoid and thermostat. Remote
models must be hard-wired at the installation site.
THE FOLLOWING APPLIES TO F2900 SERIES (SELF-CONTAINED)
ONLY:
Self-contained models have a pre-wired condensing unit with hot gas
condensate evaporator, a thermometer installed in the removable louver,
and is supplied with an 8.0' (2.4 cm) cord and plug.
Optional Accessories and Modifications
108 Drawer locks
213 *220 volt, 50 Hertz electrical system
* Inclusion of these options will alter
the electrical specifications of the unit.
Low-Profile Refrigerated Base Equipment Stands
The Delfield Company, 980 S. Isabella Rd., Mt Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
F2800 & F2900C
Model F2952C