Del ozone Total Eclipse Series, Руководство по установке и эксплуатации

Страница: 4 / 16

1
Total Eclipse Installation & Operations Manual
SECTION 1 General Information
1A. Description
The Total Eclipse is designed to recirculate pool water while
injecting ozone 24 hours a day. With the Total Eclipse you will
maximize your ozone effectiveness while minimizing your operating
costs. The Total Eclipse provides efficient, cost effective, continuous
ozone production.
1B. Specifications
• Wall Mount - 17” H x 14” W x 7” D
• Advanced Plasma Gap (Ozone) Technology
• 0.5 gr/hr (ECT-2)/ 1.0 gr/hr (ECT-4) ozone output applied to 5 gpm
nominal
• 24 hour operation independent of pool equipment
• 120V · 50/60Hz · 192W
• 240V · 50/60Hz · 192W
•
Built-in 1/20 hp recirculation pump, 5 gpm, 20 psi max
• Complete with internal injector
• Inline flow switch and check valve for protection of pump and ozone
modules
SECTION 2 Installation & Operation
2A. Installation
The most common pool and pool/spa configurations are
discussed in this manual. For additional installation options
or questions on your specific installation, please contact DEL
Ozone at 805-541-1601, extension 249.
1. The Total Eclipse
w be connected to a G.F.C.I. protected
120V/240V outlet providing continuous power.
2. Mount the Total Eclipse in a clean, protected area.
a. Install the Total Eclipse at least one (1) foot above water level,
and no higher than eight feet above the pool’s main pump.
b. In some installations, the top of the Total Eclipse cabinet can
be mounted up to 36 inches below the surface of the water.
If installed below the surface of the water, isolation valves
must be provided as a safeguard in case of prolonged loss
of power where water seepage past check valves can occur.