3
DESCRIPTION
F
UNCTION OF USE
The machine gives grass a professional cut. The grass is first raised, then cut with precision and discharged
in the rear side along the width of discharge.
It perfects any preliminary cut.
The machine is formed by 3 cutting components; each one moves in the soil with 4 pivotal wheels; each
component is free in the movements to adjust itself to the soil.
Each component takes the motion through homokinetic joints by a gear box with 4 way actioned by the PTO
of the tractor.
The 3 components follow perfectly the line of the soil making a uniform cutting action of high quality.
P
ERFORMANCES
The frame, where the cutting components are connected, permits to raise the 3 mowers for the transport,
through a hydraulic integrated system.
The pivotal wheels of the components, permit the best control both on forward gear and reverse gear; the
wheels have dimensions so as not to damage the turf.
The height of the cut is adjustable from 1 to 4 inches through distance washers that can be inserted in the
vertical pivotal axles.
The components always has their 4 wheels on the ground.
The small chains situated at the exit of the rear discharges, are a protection for eventual throws of objects
that could be hidden on the turf. Also, they disperse evenly the cut grass.
The cutting components of the machine, have the "central" lubrication of the blade-supports; in this way, the
operator can see and approach immediately the lubrication points.
P
ERFORMANCES LIMITS
Maximum forwarding speed : 5 m.p.h.
Speeds greater than the maximum can compromise the condition of the machine, the quality of the work
and the safety of the operator.
Maximum power applicable to the gear box: 41 Kw
±
5% with 540 r.p.m.
Superior power to which is indicated can damage irreparably the transmission gear box; especially
during heavy works.
S
TANDARD EQUIPMENT
- Clutch cardan shaft.
- Mowers with rubber wheels.
- Centralized lubrication.
V
ARIANTS & OPTIONS
- Mowers with rubber wheels
φφφφ
310.
- Mowers with pneumatic wheels
φφφφ
330.
- Wide angle clutch cardan shaft.
