manualshive.com logo in svg

Del Medical DynaRad Phantom-8000, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Del Medical DynaRad Phantom-8000 Скачать руководство пользователя страница 22

Phantom Installation, Operation & Service Manual

i-16     Hazardous Materials

Caution

Observe all safety precautions recommended by the accessory 
equipment manufacturer in the user documentation provided with 
the equipment.

The hardware specified for use with the Phantom has been selected, 
tested, and verified by Del Medical to meet the intended applications. All 
specified hardware meets applicable regulatory agency requirements for 
those countries where it is offered for sale with respect to its intended 
applications. Consult the user documentation included with the 
equipment for specific information relating to product safety and EMC 
compliance.

Hazardous Materials

The collimator used with the Phantom contains lead. Refer to the manual 
provided with the collimator for additional information regarding 
hazardous materials.

Содержание DynaRad Phantom-8000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды