Product-Notes
Manual
Article No.: 843003
Deko-Light Elektronik-Vertriebs GmbH
26.11.2018
www.deko-light.com / [email protected]
Technical Data can be changed without advance notice. Errors excepted.
9/9
15. Key tones
● To turn the key tones on or off, press the keys 1, 2, 3, and 9 at the same time.
● All buttons will flash once to confirm the input.
●
In the Setting key tones On the key tones when reaching minimum or maximum setting values (eg
brightness) are switched off.
● In the setting key tones off all buttons flash three times when reaching minimum or maximum set values
(eg brightness).
16. General Settings
To restore the basic settings of the ART-9RGBW, press and hold the P and B buttons for 10s. All user settings
will be lost.
17. Online Control
Each ART-9RGBW can be connected at the rear of the device via the „Link-IN / OUT“ port, this allows users to
use the online control for multi-device. Please note that a maximum of 32 devices can be connected to a link.
In Online status the color or Program selection is transmitted and reproduced through the programmed
numeric keys to all connected devices.
18. Send Data
Hold down the P, C, B and S keys for 5s until all keys blink. Press the S key to send the data to the connected
diveces now. The process takes about 10 seconds, during which time the four keys light up in sequence. The
connected devices working normal after sending the data.
