Dekema AUSTROMAT 624, Руководство по эксплуатации

Страница: 62 / 155

5. User interface AUSTROMAT
®
624 / 644
62 Operating Instructions (Version 01/2012)
5.5.2. Professional programs
Specifically, the program steps execute the following functions:
Program step Definition
Drying The firing object is dried for the specified holding time. The drying
temperature can be set in the "Setup" menu (see section 5.7.2.3).
In the "Drying" program step, the lift is automatically moved to the
right position, and the position strongly depends on the
temperature of the firing chamber. The lift may therefore move up
and down several times in small steps.
Close The firing chamber is completely closed in the specified time, and
the firing object is heated to preheating temperature.
Preheat The firing object is subjected to the preheating temperature in the
closed firing chamber for the specified holding time.
Temperature 1 The closed firing chamber is heated up to temperature 1 from
preheating temperature at the specified heat-up rate 1. When
temperature 1 is reached, the firing object is subjected to
temperature 1 for the specified holding time.
Temperature 2 Starting from temperature 1, temperature 2 is activated at the
specified heat-up rate 2 and held for holding time 2. The firing
chamber may be open (e.g. cooling, relaxation).
Temperature 3 Starting from temperature 2, temperature 3 is activated at the
specified heat-up rate 3 and held for holding time 3. The firing
chamber may be open (e.g. cooling, relaxation).
VAC (off/level/hold) After preheating and before heating up to the firing temperature,
the specified vacuum (level in %) is generated. When the set "off"
temperature is reached, the vacuum is held for the holding period.
Then the firing chamber is ventilated.
The appendix contains a table with the vacuum values.
Tab. 5-4 Meaning of the program steps for professional programs