100TB
THE BEAST
Rev: Mar2011
THE BEAST
Tow Behind Mower
8
Assembly Instructions
Step 4: Hitch Assembly
The hitch is shipped essentially
preassembled.
A. Remove the retaining clip and pin from the channel
-shaped end that allows the hitch to pivot up and
down.
B. Slide the channel shaped end over the tube
between the front wheels.
C. Use the pins removed in Step A to fasten the hitch
to the mower.
Step 5: Height Adjustment
THE BEAST is equipped with an easily-adjustable
floating deck, which can be adjusted for cut heights of
1½ inches to 4½ inches in ½-inch increments.
A. Place the height adjustment handle into either the
front or rear height adjustment sockets.
B. Remove the retaining clip and pin from the height
adjust bracket. Press down on the height
adjustment handle until the hole in the height
adjust bar aligns with the desired cut height hole
on the height adjust bracket.
C. Replace the retaining clip and pin in the height
adjust bracket. Release pressure on the handle.
D. Repeat he same adjustment process on the
opposite end of the mower.
Note: For a level cut, adjust the cut height on the wings
to match the mower for level cut height.
Front
Socket
Rear
Socket
Hitch
Assembly
DANGER
DO NOT OPERATE THIS LAWN MOWER IF ANY
COMPONENT OF THE FUEL SYSTEM IS LOOSE
OR LEAKS GASOLINE!
Step 3: Tool Box and Fuel Tank Box
A. Open the tool box and the fuel tank box. Place the
boxes on the frame aligning the four holes for
mounting each box.
B. Once the boxes are mounted, close the lid on the
toolbox, and place the fuel tank in the fuel tank box.
C. Secure the fuel tank box lid, insert the fuel valve,
and connect the supplied fuel line.
DANGER! GASOLINE IS HIGHLY FLAMMABLE AND
EXPLOSIVE. FUEL LEAKS, A LOOSE FUEL TANK, OR A
LOOSE FUEL VALVE CAN LEAD TO SEVERE INJURY OR
DEATH. ENSURE ALL CONNECTIONS ARE SECURE AND
INSPECT THOROUGHLY FOR ANY POTENTIAL LEAKS IN
THE FUEL SYSTEM. IF YOU FIND A LOOSE
CONNECTION OR A LEAK, MAKE AN IMMEDIATE
REPAIR OR ASK FOR ASSITANCE FROM A
PROFESSIONAL MECHANIC OR SERVICE CENTER.
