10
30SB, 36SB, 45SB
Snow BEAST
Snow BEAST
Snow Blower
Rev Jan 2016
Step 4: Chute Direction Control Cable Support
1. Attach the chute direction control cable hook to
the engine cover as shown.
2.
Place the chute direction control cable into the
support hook, and secure with the zip-ties
provided in the hardware bag.
Step 5: Shift Rod
The shift rod is preset at the factory, it connect the
shift handle on the control panel to the transmission
shift assembly on the chassis.
1. Use the supplied hardware connect the flat end of
the shift rod to the transmission shift assembly.
2. Connect the bent end of the shift rod to the shift
Handle.
Need Help With Assembly?
1-919-550-3221 ext. 158
Shift rod
Step 6: Cleanout Tool and Mounting Bracket
1. Insert the mounting bracket bolts into the holes on the top of the auger housing and secure with
the M8 nuts.
2. Snap the cleanout tool into the mounting bracket. Snap the cleanout tool
