DEK 265 horizon, Технические характеристики

Страница: 36 / 46

Tooling The tooling support options available for the Horizon are described briefly in
this section. The specifications for the various options are tabulated below:
Tooling PCB Support Pin Diameter Remarks
Magnetic
Support Pillars Magnetic Pins 19mm (0.75")
4mm (0.16")
Manual Changeover
Dedicated
Tooling Dedicated
machined plate N/A Manual Changeover
MultiFlex Pins 3mm (0.12") one end
tapered to 1mm
diameter 5mm matrix of support pins,
manual setting and
changeover, optional vacuum
hold down
AutoFlex Pneumatically
driven, electro -
magnetically held
pin set 4mm (0.16") Programmable matrix
Form-Flex Self forming,
pneumatically
driven pin matrix 6mm 5 -18 modules
Each module - 36 x 2 rows of
pins at 12mm pitch
Magnetic Support
Pillars
The magnetic support pillars are positioned on the manual tooling plate by the
operator. These pillars can be positioned anywhere under the board to provide
board support.
Two types of support pillar are provided:
• Standard flat-top pillars (19mm diameter) for supporting boards which are
not populated on the underside.
• Pin-top pillars (4mm diameter) for supporting boards populated on the
underside. The pins are positioned so they fit between the components on
the underside of the board.
30 Engineering Specification Chapter Issue 1 May 00
ENGINEERING SPECIFICATION
MACHINE OPTIONS
Populated Board
Flat-top Pillars used on Unpopulated Board
Manual
Tooling Plate
Flat-top Pillars
Pin-top Pillars
Pin-top Pillars used on Populated Board
Unpopulated Board
Flat-top Pillar Dimensions Pin-top Pillar Dimensions
81mm
(+0.00/-0.05mm)
19mm Dia
38mm
19mm Dia
4mm Dia