DEK 265 horizon, Технические характеристики

Страница: 38 / 46

Dedicated Tooling
Plate
The dedicated tooling plate is a 3 piece construction comprising two vertical
supports and a flat top board support. It is manufactured to the same height as the
magnetic pins irrespective of board thickness, ie 81mm (+0.00mm, -0.05mm).
The assembly has dowel registration and is held in position on the manual
tooling plate by magnets located on the vertical supports. If required the top
plate can be machined to accommodate underside components.
32 Engineering Specification Chapter Issue 1 May 00
ENGINEERING SPECIFICATION
MACHINE OPTIONS
Board Length Nominal
Tooling Box
Outline
Board Width
Nominal
Tooling Box Outline
Formulae
Width of Tooling = (Board width - 12mm)
Length of Tooling = (Board Length - 4mm)
For correct design of tooling, the following rules apply:
80mm +/- 0.05mm
Between Centres
81.00mm
+0.00/- 0.05mm
3mm x 10mm Dowel Pins
2.5mm +/- 0.1mm From
Front Edge
3.5mm +/-0.2mm