Deitz Pharmafill TC3, Руководство по эксплуатации

Страница: 55 / 84

Rev 2022-03-08 Pharmafill Model TC3 User Manual
Deitz Company Inc. TC3 User Manual Page 43
9.2 - Breakdown Of Remove-To-Clean Contact Parts (Illustrated) (Cont’d)
9. Unscrew the Disc Hold-down Ring Nut.
Remove the Plastic Hold-down Washer .
10. Carefully lift and remove the
Glass Disc (with
Aluminum Support Disc attached). Note that the
support disc has a slot which aligns with a pin on
the drive hub. Make sure this is oriented correctly
when you install the glass again.
11. This is the top of the machine with contact
parts removed. Wipe down as needed. Make sure
the
Rim Groove is clear of any dust or debris.
12. Disconnect the
Counting Sensor Electrical
Cable . First, slide the black collar down to unlock
the cable, then pull down on the connector to
disconnect the cable
HOLD-DOWN
RING NUT
HOLD-DOWN
WASHER
ALUM. HUB
(UNDER GLASS
DISC)
COUNTING
SENSOR
ELECT. CABLE
RIM
GROOVE