Deity Smart Slate TC-SL1, Руководство по эксплуатации продукта

Страница: 15 / 18

-14-
15. Timecode Synchronization
TC-SL1 uses a precision oscillator that generates timecode with a high degree of
accuracy (approximately less than 1 frames per 48 hours). You can also use the
TC-SL1 as timecode source. We recommend to feed every recording device with the
timecode from a TC-SL1 to ensure frame accuracy for the entire production.
You can use the included 5P Timecode Cable (excluding the European version ) or a
suitable adapter cable to Jam the TC-SL1 to an external timecode. Follow the steps
below : Set TC-SL1 mode to Auto Jam or Jam Once And Lock . When connected to 5P
timecode cable, TC-SL1 automatically detects and takes over incoming frame rate
and timecode immediately on jam-sync.
If you don’t have a mobile device at hand, you can synchronize TC-SL1 unit with each
other or TC-1 via wireless master sync.
Start one TC-SL1 in Master Run mode and all other TC-1 and TC-SL1 units in Auto Jam
or Jam Once And Lock mode. Set all units to the same channel (A group, for instance).
Enter the master unit’s TC setting , and select SYNC to perform the wireless master
sync using the timecode that master TC-1 is running. All units will synchronize within
a few seconds. You also can select SET to synchronize timecode starting out from
00:00:00:00 or custom starting point.
(1) Cable Sync
(2) Wireless Master Sync
*Even after powering down the TC-SL1, timecode will continue running for 6 hours.