DEI PCX-7401, Руководство по эксплуатации

Страница: 6 / 32

Page
6
of
32
For more information contact us: 970.493.1901 or sales@directedenergy.com
Document #7650-0005 Rev D1. © Copyright 2018 Directed Energy, Inc. All rights reserved.
6. Set the duty cycle

Press the Duty Cycle icon on the touch screen.

Press the encoder knob to set the resolution.

Turn the encoder knob to set the duty cycle.

Press the Done icon.
7. Enable the PCX-7401

Press the Enable button on the front panel. The button lights green.

Controlling the PCX-7401 from a computer
1. Disable the PCX-7401

Send the command “OUTPUT:DISABLE”.
2. Set the trigger to internal, external, or single shot, as needed.

Send the command “TRIG:INTERNAL”, “TRIG:EXTERNAL”, or
“TRIG:SINGLESHOT”.
3. Set the internal pulse trigger frequency

Send the command “TRIG:INT:FREQ n”, where n = [5 to 1000000].

Units are hertz.
4. Set the pulse duty cycle

Send the command “TRIG:INT:MAIN:DUTYCYCLE n”, where n = [1.00 to
99.00].

Units are percent.
5. Set the output current

Send the command “MAIN:CURRENT:SETPOINT n”, where n = [0 to
3000].

Units are milliamperes.
6. Set the bias current.

Send the command “BIAS:CURRENT:SETPOINT n”, where n = [0 to 550].

Units are milliamperes.
7. Enable the PCX-7401

Send the command “OUTPUT:ENABLE”.