DEI PCX-7401 Скачать руководство пользователя страница 4

Страница: 4 / 32

Page

For more information contact us: 970.493.1901 or

[email protected]

Safety

•

Do not open the cover of PCX-7401. There are no user-serviceable parts inside.

Opening the cover exposes you to shock and voids the factory warranty.

•

Do not install, handle, or remove the output cables or laser diode while the PCX-

7401 is operating. Allow at least 10 minutes after power-down before handling

the output cable or laser diode.

•

Do not use this device in a manner not specified by the manufacturer.

•

Allow sufficient space around this device for air circulation. Cooling air enters the

front of the chassis and exits the back of the chassis.

•

Do not use where liquids are present or in corrosive environments. Clean this

instrument by wiping with a dry or damp cloth.

WARNING

Risk of lethal electric shock. Do not open the cabinet of this device. Do not touch

the output or laser diode while it is operating. This device produces LETHAL

levels of electric current, both inside its cabinet and at its output.

DO NOT OPERATE THIS DEVICE UNLESS ANOTHER PERSON, CAPABLE OF

RENDERING FIRST AID OR RESUSCITATION IS PRESENT.

SAFE AND PROPER OPERATION OF THIS DEVICE IS THE RESPONSIBILITY OF

THE USER.

Directed Energy, Inc. (DEI) provides information on its products and associated

hazards, but it assumes no responsibility for the after-sale operation and safety

practices.

Содержание PCX-7401

































Результаты поиска

Содержание PCX-7401

Отзывы:

Похожие инструкции для PCX-7401

Бренды по названию

Популярные бренды

DEI PCX-7401, Руководство по эксплуатации

Результаты поиска

Содержание PCX-7401

Отзывы:

Похожие инструкции для PCX-7401

Бренды по названию

Популярные бренды