DEI 551 T Series, Руководство пользователя

Страница: 9 / 14

6
©
1999 Directed Electronics, Inc.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn it to the ON
(not the START) position.
2. Press the brake pedal.
NOTE: If the brake pedal is pressed before the key is
in the ON position, the engine will shut down.
While the vehicle is running during remote start operation, the sys-
tem will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the OFF position.
■
The pre-programmed run time has elapsed.
■
The auxiliary channel is pressed again.
To shut down the remote start and turn off the engine:
■
Step on the brake pedal, or
■
Press your auxiliary channel for one second.
Timer Mode automatically starts the engine and runs it for a pre-
programmed time period, every three hours for a total of six oper-
ation cycles. This feature helps to ensure that your engine will
start in the morning after a night of extremely cold temperatures.
IMPORTANT! This feature must only be used in open areas, never in an
enclosed area such as a garage.
Timer Mode