DEI 551 T Series Скачать руководство пользователя страница 11

Страница: 11 / 14

1999 Directed Electronics, Inc.

To perform Valet Take-Over:

1. Before turning off the engine, press and release the auxiliary

channel on your transmitter (or press and release the optional

Momentary switch).

2. Turn the ignition key to the OFF position.

(The engine will stay running.)

3. The engine will run until the pre-programmed

time elapses or a shut-down input is received. (See the previ-

ous Remote Start section for a complete list of shut-down inputs.)

NOTE:

This feature will not work if the brake pedal is being pressed.

This remote start system is also designed to interface with most

original equipment from manufacturer (OEM) factory remote sys-

tems. The Remote Start/Valet Take-Over sequence can be pro-

grammed to initiate with one to three (1-3) presses of one of the

OEM transmitter buttons. Consult with your dealer to determine the

transmitter button and the number of presses (1-3) that have been

programmed for this sequence. Spaces are provided below for writ-

ing in the button and number of button presses.

OEM transmitter button used for Remote Start/Valet Take-Over

sequence____________________________________________

Number of presses required to initiate Remote Start/Valet Take-

Over sequence___________________________________

Using Remote Start with Factory Remote Systems

Содержание 551 T Series















Результаты поиска

Содержание 551 T Series

Отзывы:

Похожие инструкции для 551 T Series

Бренды по названию

Популярные бренды

DEI 551 T Series, Руководство пользователя

Результаты поиска

Содержание 551 T Series

Отзывы:

Похожие инструкции для 551 T Series

Бренды по названию

Популярные бренды