DEHACO VAC CLOUD, Руководство пользователя

Страница: 5 / 12

5 © 2021 Dehaco B.V. • User Manual VAC Cloud • VAC CLOUD_2021-08_v1.0_EN
1. Creating an account
1. CREATING AN ACCOUNT
When you use the VAC negative pressure monitor for
the first time you receive an invitation to create an
account in the cloud. The link in the mail takes you to
the cloud environment where you can enter your data.
Click on “Create and log in” to confirm the data. Once
logged in to your account you receive a message to go
through the Quick Start. Click on this link to complete
the data.
1.1 Quick Start
Quick Start takes you through several important
steps to be able to make optimal use of the cloud
functionality.
1.1.1 Email Settings
The VAC Cloud generates reports of the logs created.
These reports can always be viewed in the VAC Cloud
(go to ‘Logs’) and are also sent to users by email.
Your account settings determine if, when and how you
receive notification of this. You can find these settings
at ‘My account/Notifications’.
When you have entered you preferences you go to the
next step in Quick Start.
1.1.2 Add device
Only registered devices can upload or send logs.
You can see all registered monitors on the ‘Device
management page’.
Note: the following information is only relevant if you
are a group manager. Ordinary users do not have the
authority to add a monitor. If you cannot see your
monitor there, contact a group manager.
Adding a monitor is very simple. At the top of the
‘Device management’ page click on the ‘Register my
device’ button. This page also explains how you can
access the necessary information.
Proceed as in Section 2.1 to add the VAC negative
pressure monitor to your account.
1.1.3. Processing log
To receive reports by email and be able to view them,
the log information must first be entered in VAC Cloud.
The method of processing differs per model.
Offline
If you do not have access to the Cloud (or no SIM card
is inserted) logs must be manually uploaded to VAC
Cloud. Insert the USB device in your computer with
the export for your device on it (see the manual if
necessary). Go to the ‘Uploads’ page and select ‘Upload
logs’ at the top of the screen. Then follow the steps
shown on the screen.
Cloud (online)
An online device automatically processes all log
information, and you don’t have to do anything for this.
If there are problems the monitor will report this. See
the manual if necessary. With continuing problems you
can follow the procedure above (Offline).
After going through the Quick Start the cloud is ready
for use.