background image

 

 

25

24

© 2022 Dehaco B.V. • Operation and maintenance manual DSG Demolition and Sorting grabs • No. DSG.2165.0001 • 31-01-2022

Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • 

 +31 (0)252 - 41 79 50 • 

 [email protected] • www.dehaco.nl

5. Operation

5.5.15 Extreme cylinder positions

Ensure the cylinders of the excavator arm never reach their 
extreme positions. If necessary, move the excavator to allow easy 
operation of the demolition and sorting grab.

6. Maintenance

5.5.16 Under water use

Never use the demolition and sorting grab under water. Water 
can severly damage both the demolition and sorting grab as well 
as the hydraulic system of the excavator.

6. MAINTENANCE

Maintenance work must be performed by the excavator operator 
regularly.

 WARNING!

- DISCHARGE OF HOT HYDRAULIC OIL

The hydraulic system is under high pressure. If the hydraulic
connections loosen, the hydraulic oil will spray out under
high pressure. This can lead to serious injury.

 

Ø

Switch the excavator and demolition and sorting grab off 
immediately if a leak is detected.

 

Ø

Release the pressure in the hydraulic system.

 

Ø

Repair any leaks before using the demolition and sorting 
grab again.

 WARNING!

- HOT COMPONENTS

The hydraulic cylinder, hoses, tubes and fittings become very 
hot during operation. Contact with these components can cause 
burns.

 

Ø

Never touch hot components.

 

Ø

If works need to be completed on or near hot components, 
wait for them to cool down first.

 WARNING!

- UNINTENTIONAL STARTING

Unintentional starting of the excavator/demolition and sorting 
grab can lead to serious injury.

 

Ø

Follow the instructions to avoid unintentional starting.

 WARNING!

- UNEXPECTED MOVEMENTS

Sudden movements by the excavator can cause injury

 

Ø

Secure the excavator to prevent unexpected movement.

 

Ø

   Follow the instructions from the excavator manufacturer.

 WARNING!

- SERIOUS PHYSICAL INJURY

The shells of the demolition and sorting grab may close 
unexpectedly and cause serious physical injury.

 

Ø

Ensure no one is present between the shells.

ATTENTION
- ENVIRONMENTAL CONTAMINATION BY HYDRAULIC OIL

Hydraulic oil is harmful to the environment. When hydraulic 
oil is released (e.g. by leakage) the groundwater and soil may 
become contaminated causing organisms to die.

 

Ø

Collect all spilled hydraulic oil to prevent environmental 
contamination. For small amounts, use absorbent material

 

Ø

Ensure it does not make its way into the soil, groundwater 
or water lines.

 

Ø

Collect the contaminated absorbent material in an airtight 
container and seal it well.

 

Ø

Contact a licensed waste disposal company.

 

Ø

Remove all contaminated materials in accordance with 
current environmental regulations.

Содержание DSG




















Отзывы: