Press for 5-6 seconds (not more) the central button, a RED light lights up AND fl ashes slowly = the receiver is
put in learning mode
. Remove the pencil.
Light :
Indication of the status of the
pairing with a room thermostat
Button :
Pairing mode button for
pairing with a room thermostat
On the thermostat, perform the following steps:
RADIO TRANSMISSION
1 |
On the room thermostat, press button
and hold it down
for 3 secondes
to carry out pairing.
MEMO
will be displayed.
2 |
Press . The room thermostat will then send a
radiowave confi guration message and the icon will
be displayed briefl y.
This step is also described in the following video: www.degxel.co.uk/tutorial
Do not hesitate to consult it if you have operating problems.
In order for the thermostat to communicate with the heater it’s necessary to perform this step
.
Without the coupling operation between the thermostat and the receiver there won’t be any communication be-
tween them two. Therefore, the heater won’t work. Similarly, if you experience operating problems in the future, we
advise you to repeat this step.
On the receiver, perform the following step:
Page 10
www.degxel.com
En
gli
sh
STAGE 1 |
PAIRING THE ROOM THERMOSTAT WITH A RECEIVER
