4, rue de Jarente - F 75004 Paris
Tel: +33 (0)1 71 18 18 60
Fax : +33 (0)9 70 80 10 00
S A S a u c a p i t a l d e 1 0 5 0 0 0
€
R C S P a r i s B 4 0 2 2 1 1 0 1 5
T V A : F R 0 5 4 0 2 2 1 1 0 1 5
5/29
1.1
Assembling the ceiling adapter and attaching to the arm.
Shorten the ceiling arm if necessary. The provided arm can be used in 3m (118in.) high rooms. If the room is lower,
shorten the arm accordingly.
(Example: shorten the arm 500mm (20in.) if the room height is 2.5m.)
Use one of the bracket sections as a template and mark the position of the security screw hole that must be drilled with
a 5mm drill at the end of the light column. Note that the bracket must be positioned so that the small stop tab touches
the top of the light column (1).
Drill the holes for the security screw where it is marked on the light post (5mm Ø). Assemble the three parts of the
bracket and clamp them to the end of the column. Make sure that the security screw hole in the bracket sector lines up
with the hole that you have just drilled in the light column. Screw the security screw into the hole on the bracket section
and into the light column to secure it in its position (2)
