Degometal GO 3313, Руководство пользователя

Страница: 19 / 32

19
www.degometal.com
Start-up
Before starting the riveting tool, read and observe the operating instructions as
well
as safety information
and keep in a safe place.
●
Insert fully charged battery in correct position into the blind rivet nut setting
tool.
●
Select
nosepiece and threaded mandrel from Table 2.6 and
screw
on (M6
in
working
position
).
Caution !
The air inlets for the motor must not be obstructed; do not insert any objects into them.
A. Setting the threaded mandrel length x (Fig. 2 )
●
Set
the threaded mandrel length x to the blind rivet nut length by
turning the nosepiece B.
● Fully utilise the thread depth of closed blind rivet nuts (Fig. 2; 4).
●
Secure
setting of nosepiece B
with
lock nut C.
B. Adjusting the setting stroke y (Fig. 2)
●
The setting stroke y depends on the size of the blind rivet nut
(M3-M10) and of the rivetable material z (Fig. 4).
Reference values for setting stroke y:
Threadsize
Setting Stroke
y (in mm)
min. max.
M4 1 2
M5 1.5 2.5
M6 2.5 3.5
M8 2.5 3.5
M10 3 4
●
The setting stroke y is adjusted by
screwing
the setting nut D in and out.
Caution !
●
Initially adjust the setting stroke y to the “min.” value and then set a blind
rivet nut.
●
If the blind rivet nut does not form a distinct closing as
shown
in Fig. 4 ,
increase the setting stroke y in steps.
●
Secure
the setting nut D
with
lock nut E.
FR
ANCA
IS
EN
GLI
SH