23.09.2015
ASSEMBLY AND OPERATING MANUAL DEGERtracker S60H CF
Page 17
6 Assembling the DEGERtracker
DANGER!
Danger to life due to suspended loads.
If heavy components swivel out and fall down, this may result in serious injury or even death.
Never walk under or in the range of pivotal movement of suspended loads
Only move loads under supervision.
Only use lifting equipment and load attachments that are designed to carry the weight of the
respective component.
Do not use any lifting equipment such as rope or belts that are torn.
Ensure an off-middle centre of gravity.
Parts may only be lifted by people who are authorised to operate the lifting equipment.
Work is to be halted if wind speeds exceed 3 m/s.
Wear protective helmet, shoes and gloves.
DANGER!
Danger of death due to uncontrolled moving parts.
If heavy components swivel out and fall down, this may result in serious injury or even death.
WARNING!
Risk of injury due to improperly performed assembly work.
Improperly performed assembly work may result in serious injury and considerable material
damage.
Ensure sufficient space for the assembly is available before starting. Parts of one system may be
up to 6.8 m long.
The DEGERtracker must be assembled on a flat surface.
Ensure proper assembly. Comply with all prescribed bolt tightening torques.
Fall protection equipment required when working more than 1 m above the ground. Use PPE to
prevent falling.
Wear protective helmet, shoes and gloves.
WARNING!
Risk of injury due to sharp-edged parts.
Sharp-edged parts when assembling the DEGERtracker can cause hand injuries.
Wear protective gloves.
DANGER
Risk of injury due to improperly performed assembly work.
Improperly performed assembly work may result in serious injury.
