background image

19 / EN

Washing Machine / User’s Manual

6  Technical specifications

Complying Commission Delegated Regulation (EU) No 1061/2010

Supplier name or trademark

DEFY

Model name

WMY 81443 MLCM

Rated capacity (kg) 

8

Energy efficiency class /  Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)

A+++

Annual Energy Consumption (kWh) 

(1)

193

Energy consumption of the standard 60°C cotton programme at full load  (kWh)

1.000

Energy consumption of the standard 60°C cotton programme at partial load  (kWh)

0.780

Energy consumption of the standard 40°C cotton programme at partial load  (kWh)

0.700

Power consumption in ‘off-mode’ (W)

0.440

Power consumption in ‘left-on mode’ (W)

0.640

Annual Water Consumption (l) 

(2)

9900

Spin-drying efficiency class / Scale from A (Highest Efficiency) to g (Lowest Efficiency)

B

Maximum spin speed (rpm)

1400

Remaining moisture Content (%)

53

Standard cotton programme

 (3)

Cotton Eco 60°C and 40°C

Programme time of the standard 60°C cotton programme at full load (min)

204

Programme time of the standard 60°C cotton programme at partial load (min)

175

Programme time of the standard 40°C cotton programme at partial load (min)

175

Duration of the left-on mode (min)

N/A

Airborne acoustical noise emissions washing/spinning (dB)

52/77

Built-in

No

Rated capacity (kg) 

8

Height (cm)

84

Width (cm)

60

Depth (cm)

54

Net weight (±4 kg.)

71

Single Water inlet  / Double Water inlet

• / -

• Available
Electrical input (V/Hz)

230 V / 50Hz

Total current (A)

10

Total power (W)

2200

Main model code

9711

(1)

 Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption of 

the low-power modes. Actual energy consumption will depend on how the appliance is used.

(2)

 Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water consumption 

will depend on how the appliance is used.

(3)

 “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information in the 

label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in 
terms of combined energy and water consumption. 
Technical specifications may be changed without prior notice to improve the quality of the machine .

Содержание WMY 81443 MLCM




























Отзывы: