Page 6
Preparation
Preparation of location, electrical,
tap water and waste water
installations of the machine are the
customer's responsibility.
Ensure that the water inlet,
discharge hoses and power cable
are not folded, pinched or crushed,
during or after installation or
cleaning procedures.
Warning:
Prior to installation,
visually check if the machine has
any defects on it. If so, do not
install it. A damaged machine is a
safety risk.
Things to be done for energy saving
•
Always follow the instructions on the
detergent packaging.
•
Wash slightly soiled laundry at low
temperatures.
•
Use faster programmes for small
quantities of lightly soiled laundry.
Before moving the machine, take note of
figure A
on how to carry the machine.
Figure
A
Remove package
•
Remove package and take out the bottom
board of the cabinet on the foam cover.
•
Open the washer door lid and take out the
accessories.
•
Never perform a trial operation or run the
washing machine on the foamed cushion
as this is extremely dangerous.
Warning:
Packaging materials
are Dangerous to children. Keep
packaging materials in a safe place
away from the reach of children.
