Page 8
Optional feet assembly process:
1. Remove the two front adjusting feet and
two rear feet rubbers.
2. Fit the four optional feet and fix with
screws as per the following diagram.
Disposing of the washing machine
•
This washing machine has been
manufactured with high quality parts and
materials which can be reused and are
suitable for recycling.
•
Do not dispose of the machine with
normal domestic waste at the end of its
service life.
Please consult with your local authorities.
•
Should you at any time in the future scrap
the washing machine, cut the power cord
and take measures to render the door
inoperative thereby preventing children,
when playing, getting trapped inside.
Things to be done for energy saving
•
Always follow the instructions on the
detergent packaging.
•
Wash slightly soiled laundry at low
temperatures.
•
Use faster programmes for small
quantities of lightly soiled laundry.
Ensure parts and accessories are
Installed according to the
directions given in this instruction
manual.
Ensure that the machine is level. Check
the leveller on the machine. (Depends on
model). An unlevelled machine is unstable
& will vibrate and generate excessive noise.
1. Unplug the machine before transporting it.
2. Remove the water drain and water supply
connections.
3. Drain all the water that has remained in
the machine.
4. Fit the polystyrene and then package the
machine.
Transportation of the machine
Using detergent /softener and bleach
When using detergent, softener,
starch, fabric dye, bleach or
limescale remover please ensure
you read the detergent
manufacturer's instructions on the
package carefully and follow the
suggested dosage values. Use
measuring cup if available.
Adjusting the feet
Adjust the feet so that the machine is level
and balanced. A machine that is unlevelled
will vibrate, generate excessive noise,
damage the safety switch and may not
complete the spin function.
Adjust the 2 adjustable legs of the machine
by turning them either in a clockwise or anti
clockwise direction.
