Defy DTL151, Руководство пользователя

Страница: 17 / 20

Page 17
Technical Specifications
Model No. DTL151
Rated power supply 230v~50Hz
Input power of moter 550W
Dimension W x D x H (mm) 640 x 680 x 1025 mm
Water pressure 0.03MPa~0.8MPa
Net weight (Kg) 53
Washing mode New water flow
Draining mode Upper draining
Spin mode Centrifugal spin
Wash programme guide
Fault Reason
No water flows into
machine The power is off
Water supply is cut off or water pressure is too low
The filtering screen of the inlet valve is blocked by dirt
The inlet valve coil is damaged (A slight electromagnetic sound is
normal when the inlet valve is operating)
The “Start/Pause” button is pressed after the power switch is
pressed
Not washing The power is off
The power supply voltage is too low
The water volume does not reach the required mark (Washer will
not work if the required water level is not met)
Washer is set to ”Delay” washing mode. (It will only start working
when the delayed time has been reached)
Abnormal draining The water drain hose has been placed too high.
The end of the water drain hose is blocked.
The internal rubber ring of the drain valve is blocked by dirt.
Abnormal spinning Check that the door lid is closed
Clothing is unevenly placed in the drum.
The ground is not flat or the machine is not level.
During the spin process if washing is piled to one side of the spin tub it will cause
unbalance of the spin tub. The sensor will pick up the unbalance and will
automatically correct it. If after 3 corrections the unbalance remains the auto
correction cannot resolve the problem then the user must manually place the
clothing evenly inside the tub to solve the problem.