Defy DTL151, Руководство пользователя

Страница: 6 / 20

Page 6
Installation and electrical connections of the
machine must be carried out by an
Authorized Service Agent. Review
information in the user manual and ensure
that the electricity, water supply and water
drainage systems are appropriate before
calling an Authorized Service Agent. If they
are not, call a qualified technician and
plumber to have any necessary
arrangements carried out.
Installation
Preparation of location, electrical, tap
water and waste water installations of
the machine are the customer's
responsibility.
Warning: Installation and electrical
connections of the machine must be
carried out by an Authorized Service
Agent. The Manufacturer shall not be
held liable for damages that may arise.
Warning: Prior to installation, visually
check if the machine has any defects
on it. If so, do not have it installed. A
damaged machine is a safety risk.
Ensure that the water inlet, discharge
hoses and power cable are not folded,
pinched or crushed, during or after
installation or cleaning procedures.
Warning: Installation and
electrical connections of
the machine must be
carried out by an
Authorized Service Agent.
The Manufacturer shall
not be held liable for
damages that may arise.
Remove package
•
Remove package and take out the bottom
board of the cabinet on the foam cover.
•
Open the lid of washer's door and take out
accessories.
•
A trial operation or washing on the
foamed cushion is dangerous and strictly
forbidden.
Ensure that the power plug and
power cord are properly
connected.
•
Never touch the plug with wet
hands!
•
Never unplug by pulling on the
cable, always pull out by
grabbing the plug.
•
Do not operate a damaged
washing machine. Consult with
your nearest DEFY service
centre should you have any
concerns.
•
If the power cable is damaged,
it must be replaced by the
manufacturer, after sales
service or a similarly qualified
person.
•
Never plug the washing
machine into the wall socket
during installation. Death or
serious injury may result.
•
For safety reasons, the wall
socket and the plug should be
accessible after installation.
•
Do not make connections via
extension cables or multi-plugs.
•
Pull out the plug from the wall
socket if the machine is not
going to be used.