Defy DTD 297, Руководство пользователя, Страница: 9 / 24

9 - EN
Connecting the water drain hose for
models with the water tank at the bottom;
Connection pipe to water drain is at the
bottom rear of your machine.
1. Remove the bracket and the rubber cap.
2. Attach the drain hose and replace the
bracket to its position.
Important:
C
There is no pump in the machine, so ensure
that the hose is placed to allow a easy
water flow.
C
The end of the hose should never be higher
than the level of the water outlet on the
machine. Otherwise, the “tank full” LED of
your machine will illuminate and stop the
program.
C
If the dryer is mounted on the washing
machine by means of a bracket, use of
the water drain hose is recommended.
The drain hose should be directed
downwards as shown in the figure.
Electrical connection
Connect the machine to an earthed outlet
protected by a fuse of suitable capacity.
Important:
• Connection should comply with national
regulations.
• Power cord plug must be within easy reach
after installation.
• The voltage and the allowed fuse protection
are specified in the section “Technical
Specifications”.
• The stated voltage must match with your
mains voltage.
• Connection via extension cords or multi-
plugs should not be made.
• The main fuse and switches must have a
contact distance of minimum 3 mm.
B
A damaged power cable must be replaced
by a qualified electrician.
B
The appliance must not be operated unless
it is repaired! There is the risk of electric
shock!
Destroying packaging material
Packaging material can be dangerous to
children. Keep the packaging materials out
of the reach of children or dispose of them
accordingly. Do not dispose of them together
with normal domestic waste.
Packaging materials of your machine are
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmentally friendly manner.
• You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose of
your machine.
Before disposing of your old machine, cut
off the mains plug and make the door lock
unusable.