15 - EN
Auxiliary function
Cancel Audio Warning
Your machine will send out an audio warning
when the program comes to an end. If you
do not want to hear this buzzing, you need
to press the “Cancel Audio Warning” button.
The relevant LED will light up when this button
is pressed and an audio warning will not be
given when the program comes to an end.
C
You can select this function either before
or after the program starts.
Warning indicators
C
Warning indicators may differ according
to the model of your machine.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C
If the filter cleaning warning LED lights up
continuously, please refer to, “Solution
suggestions for problems”.
Water tank
A warning LED will light up at the end of
the program or when the tank is full with
water. The machine stops operating when
this warning LED lights up during a program
running. To restart the machine, please drain
the water in the water tank. Press “Start/
Pause/Cancel” button to start the program
after you have emptied the water tank. The
warning LED goes off and the program
resumes operating.
Starting the Program
1. Press “Start/Pause/Cancel” button to
start the program.
2. “Start/Pause/Cancel” button will light up
to indicate that the program has started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step, the
relevant indicator LED will light up and light of
the completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the drying degree
reaches “ Ready to Iron “.
“ Ready to Iron “:
- Starts to illuminate when the drying degree
reaches “ Ready to Iron “ step and remains
illuminated until the next step.
“
Ready to Wear “:
- Starts to illuminate when the drying degree
reaches “
Ready to wear “ step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes to an
end and anti-creasing function is activated.
C
If more than one LED light up or flash
concurrently, it means there is malfunctioning or
a failure (please see, Solution suggestions for
problems).
Changing the program after the
program has started
You can use this feature after your machine has
started to dry your clothes under higher or lower
temperatures.
For example;
Press and hold the “Start/Pause/Cancel” button
for about 3 seconds to “Cancel” the program in
order to select “Extra Dry” program instead of
“Iron Dry” program.
Select the “Extra Dry” program by rotating the
program knob.
Press “Start/Pause/Cancel” button to start the
program.
C
The program which is selected first will go
on even if the program selection button
is moved and another program mode is
selected while the machine is operating. You
must cancel the ongoing program in order to
change the drying program. (See, Ending the
program through canceling)
Adding/removing laundry in standby mode
In order to add or take out laundry after the start-
up of the program;
1. Press the “Start/Pause/Cancel” button to
switch the machine to “Pause” mode. Drying
process will stop.
2. Open the door at Pause position and close it
again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start
the program.
C
Any laundry added after the drying process
was started may cause the already dried
clothes in the machine intermingle with wet
clothes and the result will be wet laundry
after the drying process is over.
C
Laundry may be added or taken out as
much as desired during a drying process,
but as this process will interrupt drying
continuously, it will extend the program
duration and increase energy consumption.
Therefore, it is recommended to add laundry
before the drying program is started.
Child-proof lock
There is a childproof lock to prevent any program