CONDITION
ACTION
NOTES AND COMMENTS
Requires routine
cleaning
Mild detergent solution
applied with soft sponge or
cloth. Rinse and wipe dry.
If possible use warm to hand-
hot water. A 5% addition of
ammonia is beneficial.
Finger prints
Pre-treat finger marks with
alcohol or an organic solvent.
Follow immediately with
routine cleaning.
Minimize re-occurrence by
applying a wax or silicone
based household polish to the
clean dry surface.
Wipe with a little baby oil
and a soft lint free cloth. Buff
to shine.
Apply whenever necessary.
Stubborn stains and
discolouration
Use a little Ceran cleaning
paste. (available from Defy
Service Centres)
Rinse and dry.
Repeat several times rather than
resorting to a single aggressive
cleaning method.
Grease and fat splatter. Wipe off excess with a soft
cloth or paper towel. Use a
water borne degreasing agent
(dishwashing liquid). Follow
up by routine cleaning.
Scratches on the brushed
finish.
For slight scratches, use a
nylon pad loaded with an
iron free abrasive polishing
compound. Follow the
direction of the original
texture. Follow up with
routine cleaning. For deep
scratches use a coarser
abrasive initially and follow
up as for light scratches.
Deep scratches will be difficult
to remove completely. Do not
use steel wool or metal scourers
unless they are made from
stainless steel.
It must be appreciated that some of the above suggested procedures will alter the
surface appearance of the treated area.
They should therefore only be applied with due consideration and care.