Defy DHG605 Скачать руководство пользователя страница 18

Page 18 

How to use Electric plate 
 1. Switching the cooktop on and off 

To switch the cooktop on, hold down the 

power button for one second. All cooking 

zones will switch on displaying a ‘0’ power 

level. You will hear one short beep.  
 
To switch off the cooktop, press the power 

button, all cooking zones will be switched off. 

You will hear 4 short beeps.  

4. How to Activate the Child Lock 

 

If the “+” and “-“ buttons are held down at the 

same time for 1.2 seconds then the hob will 

lock. The display will show a “L”.  
To unlock the hob press the “+” and “-“ 

buttons at the same time for 1.2 seconds. A 

short beep will be heard and a ‘n’ will be 

displayed. The hob is automatically locked 

when switched off.  

If a cooking zone is on power level ‘0’ and 

the surface is still hot, 0 will flash on the 

display. After 10 seconds a ‘H’ will appear on 

the display.  

2. Changing power level of cooking zone.  

Select the cooking zone by pressing the 

triple zone symbol. To increase the power 

level press the ‘+’ button and to decrease the 

power level press “-“.  

If you are on level ‘0’ and you press ‘-‘ you 

will go to level ‘P’ You cannot press ‘+’ to go 

back to level ‘0’. Continuously holding down 

button “+” or “-“ will increase or decrease the 

power level.  

Triple 

zone 

symbol 

3. How to activate the Triple Zone  

If you want to activate the second ring of the 

triple zone, press      as shown below. You 

will hear a short beep  
 
If you want to activate the third ring of the 

triple zone, press       again as shown below. 

You will hear a short beep. 
 
If you wish to deactivate the triple zone, 

press       again.  

Built in safety 
1. Automatic Safety Off  

Your hob will automatically switch off if the 

power level is not changed after a set 

amount of time.  

Power level  Max. time on (h) 

10 

2. Overflow 

Safety  

If an object or 

liquid is on the 

hob controls for 

more than 5 

seconds, 2 short 

beeps will sound 

followed by one 

long beep every 

30 seconds until 

the liquid or 

object has been 

removed, display 

shows this 

symbol:  

5. How to Use the timer  

• 

Select the cooking zone that you would 

like to set a timer for.  

• 

Hold down the timer button. 

• 

Press the ‘+’ and ‘-‘ button to adjust the 

duration of the timer. 

• 

The max time that can be set is 99 

minutes. When the timer is done, the hob 

will beep.  

• 

The timer can be adjusted after it has 

been set.  

DO NOT TOUCH 

THE COOKING 

ZONE IF “H” IS 

DISPLAYED. 

 

Содержание DHG605

























Отзывы: